EMC Cable Gland (Metric/Pg thread)
EMC Cable Gland (Metric/Pg thread)
Pasiuna
Ang mga glandula sa cable kasagarang gigamit sa pag-clamp, pag-ayo, pagpanalipod sa mga kable gikan sa tubig ug abug.Kini kaylap nga gigamit sa mga natad sama sa control boards, apparatuses, suga, mekanikal nga kagamitan, tren, motor, proyekto ug uban pa.
Makahatag kami kanimo og EMC cable glands nga hinimo sa nickel-plated brass (Order No.: HSM.ZX-EMV.T), stainless steel (Order No.: HSMS.ZX-EMV.T) ug aluminum (Order No.: HSMAL.ZX-EMV.T).
| Materyal nga: | Ang gawas nga metal mao ang brass nickel plating, ang kinauyokan mao ang Silicon rubber, ug ang tubod mao ang stainless steel |
| Temperatura Range: | Min -50℃,Max 150℃ |
| Degree sa pagpanalipod: | Sulod sa clamping range, ang lebel sa pagpanalipod niini mahimong moabot sa IP68 |
| Sertipiko: | CE |
Espesipikasyon
(Palihug kontaka kami alang sa dugang nga kasayuran kung kinahanglan nimo ang ubang mga gidak-on o mga hilo nga wala maapil sa mosunod nga lista.)
| Artikulo No. | Gidak-on sa kable(mm) | Diametro sa kable (mm) | Gitas-on sa hilo (mm) | Pinaagi sa Connecting Terminal | Gipanalipdan nga Epektibo nga Wire Diameter (mm) | H(mm) | SW1/SW2 (mm) |
| HSM.ZX-EMV.T-M12/8(S) | M12×1.5 | 5~8 | 6 | 7 | 3.5-7 | 20 | 17/17 |
| HSM.ZX-EMV.T-M12/8-T | M12×1.5 | 4~8 | 6 | 7.5 | 4-7 | 33 | 17/17 |
| HSM.ZX-EMV.T-M16/8 | M16×1.5 | 5~8 | 6 | 7 | 3.5-7 | 23 | 17/18 |
| HSM.ZX-EMV.T-M16/9.5-T | M16×1.5 | 4~9.5 | 7 | 9.5 | 6.5~9 | 36 | 22/22 |
| HSM.ZX-EMV.T-M18/10 | M18×1.5 | 7~10 | 7 | 10.2 | 6~10 | 27 | 20/20 |
| HSM.ZX-EMV.T-M22/13 | M22×1.5 | 10~13 | 7 | 12 | 8~12 | 26.5 | 24/24 |
| HSM.ZX-EMV.T-M20/12 | M20×1.5 | 7~12 | 7 | 12 | 7.5~11 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/13 | M20×1.5 | 10~13 | 7 | 12 | 8~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-M20/15-T | M20×1.5 | 12~14 | 7 | 14 | 11~14 | 35 | 24/24 |
| HSM.ZX-EMV.T-M25/16 | M25×1.5 | 11~16 | 7 | 15.5 | 8~15 | 32 | 30/30 |
| HSM.ZX-EMV.T-M25/17-T | M25×1.5 | 13~17 | 7 | 16.5 | 10.5~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M25/19-T | M25×1.5 | 12~19 | 7 | 18.5 | 12~18 | 39 | 32/32 |
| HSM.ZX-EMV.T-M25/22-T | M25×1.5 | 18~22 | 8 | 21 | 13.5~21 | 36 | 36/36 |
| HSM.ZX-EMV.T-M25/20-T | M25×1.5 | 16~20 | 7 | 19 | 12~19 | 34.5 | 30/30 |
| HSM.ZX-EMV.T-M27/17-T | M27×2.0 | 14~17 | 8 | 18 | 11~16 | 36.5 | 30/30 |
| HSM.ZX-EMV.T-M30/21 | M30×2.0 | 14~21 | 8 | 20.5 | 12.5~20 | 30 | 36/36 |
| HSM.ZX-EMV.T-M32/19 | M32×1.5 | 14~19 | 8 | 21 | 13.5~18 | 31 | 32/36 |
| HSM.ZX-EMV.T-M32/20-T | M32×1.5 | 16~20 | 8 | 19 | 12~19 | 33.5 | 30/36 |
| HSM.ZX-EMV.T-M32/21-T | M32×1.5 | 17~21 | 8 | 22 | 14.5~20 | 38 | 36/36 |
| HSM.ZX-EMV.T-M32/23 | M32×1.5 | 18~23 | 8 | 22 | 15.2~22 | 27.5 | 36/36 |
| HSM.ZX-EMV.T-M32/23-T | M32×1.5 | 18~23 | 8 | 22.8 | 14.8~22 | 36 | 36/36 |
| HSM.ZX-EMV.T-M32/25-T | M32×1.5 | 19~25 | 8 | 25 | 18~24 | 39 | 38/38 |
| HSM.ZX-EMV.T-M33/21 | M33×2.0 | 17~21 | 8 | 21 | 14~20 | 28.5 | 36/36 |
| HSM.ZX-EMV.T-P16/14 | PG16 | 10~14 | 7 | 13 | 8.5~12 | 27 | 24/24 |
| HSM.ZX-EMV.T-P21/19-T | PG21 | 14~19 | 7 | 18.5 | 13~18.5 | 40 | 32/32 |
| HSM.ZX-EMV.T-P21/20 | PG21 | 16~20 | 7 | 18 | 11~19 | 30 | 30/30 |
| HSM.ZX-EMV.T-P21/20-T | PG21 | 16~21 | 7 | 21 | 11.5~21 | 38 | 32/32 |
Aplikasyon
